|
Safecoat Penetrating WaterStop is recommended for porous brick, concrete block, concrete and stucco. It can also be used over wood to increase water repellency and reduce water absorption. Its low odor and non-toxic ingredients make it ideal for use indoors, a safer alternative to high solvent content sealers. Provides good water resistance for up to five years when properly applied. Apply to clean, dry surfaces free of any foreign matter or contaminants (dirt, dust, grease, wax, silicone, soap, etc.). Surfaces should be fog sprayed with clear, low-salt content water immediately prior to application to allow for even penetration. Apply with brush or spraying equipment in an even manner. Do not use roller. Always test sample area for compatibility. Use only one coat; most surfaces, 200-300 square feet per gallon. Natural limestone, 300-500 square feet per gallon. Clean tools and equipment, while still wet, with SafeChoice Super Clean and warm water.
read the Material Safety Data Sheets on the SafeCoat products.
|
